PLD3016 Gantry Mobile CNC Plate Drilling Machine
| Item | Name | Value |
| Size of plate | Thickness of plate | Max 80mm/100mm |
| Width*Length | 1600mm×3000mm (One piece) |
|
| 1500mm×1600mm (Two pieces) | ||
| 800mm×1500mm (Four pieces) | ||
| Drilling spindle | Quick-change drill chuck | Morse 3＃, 4＃ |
| Diameter of drilling head | Φ12mm-Φ50mm | |
| RPM | 120－560r/min | |
| Stroke | 240mm/180mm | |
| Processing feeding | Hydraulic stepless speed adjustment | |
| Hydraulic clamping | Thickness of clamping | 15－80mm/15-100mm |
| Quantity of clamping cylinder | 12 pieces | |
| Clamping force | 7.5kN | |
| Cooling fluid | Mode | Forcing cycle |
| Motor | Spindle | 5.5kW |
| Hydraulic pump | 2.2kW | |
| Chip removal motor | 0.4kW | |
| Cooling pump | 0.25kW | |
| Servo system of X axis | 1.5KW | |
| Servo system of Y axis | 1.0kW | |
| Servo system of Z axis | 1.0kW | |
| Overall dimensions | L*W*H | About 5560*4272*2449mm/ About 6183*2700*2850mm |
| Weight(KG) | Main machine | About 7600kg/5000kg |
| Scrap Removal Device | About 400kg | |
| CNC Axis | X,Y（Point position control）Z(Spindle, Hydraulic feeding) | |
| Travel | X Axis | 3000mm |
| Y Axis | 1600mm | |
1. The machine is mainly composed of bed, gantry, drilling power head, hydraulic system, control system, centralized lubrication system, chip removal system, cooling system, quick change chuck, etc.
2. Hydraulic automatic control stroke power head is our company's patented technology. Before use, it does not need to set any parameters. It can automatically convert fast forward, work forward and fast backward. It is realized through the combined action of electromechanical and hydraulic.
3. The plate is clamped by hydraulic clamp and controlled by foot switch.
4. There are two CNC axes in the machine: gantry movement (x axis); the movement of drilling power head on the gantry beam (Y axis).
5. The machine adopts centralized lubrication system to improve the performance of the machine tool and prolong its service life.
6. The drill bit of the machine tool is cooled by circulating water. There is a chip remover under the bed, which can automatically remove chips.
7. The control program adopts the upper computer programming software developed by our company and matched with PLC. It has the functions of man-machine dialogue, automatic alarm, etc. the plate size can be input by manual keyboard or U disk interface.
|
NO. |
Name |
Brand |
Country |
|
1 |
Linear guide rail |
CSK/HIWIN |
Taiwan (China) |
|
2 |
Hydraulic pump |
Just Mark |
Taiwan (China) |
|
3 |
Electromagnetic valve |
Atos/YUKEN |
Italy/Japan |
|
4 |
Servo motor |
Inovance |
China |
|
5 |
Servo driver |
Inovance |
China |
|
6 |
PLC |
Inovance |
China |
|
7 |
Computer |
Lenovo |
China |
Note: The above is our standard supplier. It's subject to be replaced by same quality components of other brand if the above supplier can't supply the components in case of any special matter.
Company Brief Profile 
Factory Information 
Annual Production Capacity 
Trade Ability 
