Factory Cheap Hot Angle Machine Tower - CNC Drilling Machine for Beams – FIN CNC

Product Application Introduction

Send email to us

by SGS Group

Employees

299

R&D staffs

Patents

154

Software ownership (29)

Product Detail

Feedback (2)

We believe in: Innovation is our soul and spirit. Quality is our life. Shopper need is our God for Pipe Drilling Machine, Machine Marking, Tower Steel, We're devoted to supply skilled purification technology and options for you personally!

Factory Cheap Hot Angle Machine Tower - CNC Drilling Machine for Beams – FIN CNC Detail:

Product Parameters

Item name	Parameter
		BD150C-3		BD200E-3
Dimension of material H Beam	Maximum length of H beam	2100mm		1600mm
	Maximum size of H beam (width × height)	1500*1500mm		1000*2000mm
	Minimum section size of H beam (width × height)	500*500mm		400*1000mm
Working table (Fixed)	Height of worktable from the ground	900mm
	Width of T-slot on worktable	28mm
Gantry longitudinal movement (X-axis)	X-axis stroke	21m		16m
	X-axis servo motor power	2×3.0kW
Lateral movement of power head on gantry beam (V-axis)	V-axis stroke	1500mm	1980mm
	V-axis servo motor power	1.5KW
Vertical movement of power head on double column of gantry (U-axis, W-axis)	U-axis, W-axis stroke	1500mm	980mm
	U-axis, W-axis servo motor power	2×1.5kW
Table type drilling (sliding head)	Quantity	3
	Maximum hole drilling diameter	12～50
	Spindle RPM (frequency conversion 30-100Hz)	120－400r/min	120-560r/min
	Morse taper of spindle	4	8
	Spindle motor power	3×7.5kW
	Axial stroke (1 axis, 3 axis)	600mm	780mm
	Axial stroke (2-axis)	700mm	580mm
	1-axis, 2-axis, 3-axis drive mode	AC servo motor, ball screw drive
	1-axis, 2-axis, 3-axis feed rate	0－4000mm/min
	1-axis, 2-axis, 3-axis servo motor power	3×1.5kW
	Motor power of hydraulic pump	3＋4kW
Chip removal and cooling	Chip conveyor type	Flat chain
	Chip removal speed	1m/min
	Chip conveyor motor power	2×0.75KW
	Cooling pump motor power	0.45KW
Electrical system	Numerical control system	PLC
	Number	8
	Total power of machine tool	About 47kw
Overall dimension (L × W × H)		About 26m × 4.5 m× 4.2m
Weight		About 60tons

Details and advantages

1. The machine is mainly composed of bed, gantry, headstock, electrical system, hydraulic system, cooling chip removal system, detection system, etc.
2. The machine adopts the structure of gantry moving and fixed worktable, which can reduce the bed length and save the floor area.

CNC Drilling Machine for Beams4

3. The gantry motion (x-axis) is driven by linear ball guide, AC servo motor and low backlash rack and pinion. Linear ball guide, AC servo motor and ball screw drive are used to guide the movement of gantry crossbeam and sliding plate on two vertical columns (U, V, W). The feed motion of each drilling head (Axis 1, 2 and 3) is guided by linear roller guide, driven by servo motor and ball screw.
4. The spindle adopts the CNC feed drilling power head produced by our company.

CNC Drilling Machine for Beams5

5. The bottom of the machine is equipped with a flat chain type chip remover, and the chip conveyor is equipped with a water pump and a cooling liquid filtration circulating device.

CNC Drilling Machine for Beams6

6. The hydraulic system is mainly used for X-axis positioning and locking and balancing of power heads on both sides.
7. The electrical system is controlled by PLC and equipped with upper computer. The material is input and stored by computer, so it is easy to operate.

Key outsourced components list

NO.	Name	Brand	Country
1	Linear ball guide pair	HIWIN/PMI	Taiwan, China
2	PLC	Mitsubishi	Japan
3	Servo motor and driver	Mitsubishi / Panasonic	Japan
4	Hydraulic valve	ATOS	Italy
5	Oil pump	Justmark	Taiwan, China
6	Button, indicator light	Schneide	France
7	Drag chain	JFLP	China

Note: The above is our standard supplier. It’s subject to be replaced by same quality components of other brand if the above supplier can’t supply the components in case of any special matter.

Product detail pictures:

Related Product Guide:

It really is a good way to further improve our goods and service. Our mission would be to acquire inventive items to buyers with a very good encounter for Factory Cheap Hot Angle Machine Tower - CNC Drilling Machine for Beams – FIN CNC , The product will supply to all over the world, such as: America, Iceland, Philadelphia, We have sufficient experience in producing products according to samples or drawings. We warmly welcome customers from home and abroad to visit our company, and to cooperate with us for a splendid future together.

Angle Bending

Angle CNC Machine

Angle Machine

Angle Marking Machine

Angle Punching Machine

With a positive attitude of "regard the market, regard the custom, regard the science", the company works actively to do research and development. Hope we have a future business relationships and achieving mutual success.