Chinese wholesale Steel Tower - CNC Drilling Machine for Beams – FIN CNC

Product Application Introduction

Send email to us

by SGS Group

Employees

299

R&D staffs

Patents

154

Software ownership (29)

Product Detail

Feedback (2)

Persisting in "High good quality, Prompt Delivery, Aggressive Price", we've established long-term cooperation with shoppers from each overseas and domestically and get new and previous clients' high comments for Band Saw Machine For Cutting, Saw Band, Marking Machine, Our business has already setup a professional, creative and responsible workforce to develop purchasers together with the multi-win principle.

Chinese wholesale Steel Tower - CNC Drilling Machine for Beams – FIN CNC Detail:

Product Parameters

Item name	Parameter
		BD150C-3		BD200E-3
Dimension of material H Beam	Maximum length of H beam	2100mm		1600mm
	Maximum size of H beam (width × height)	1500*1500mm		1000*2000mm
	Minimum section size of H beam (width × height)	500*500mm		400*1000mm
Working table (Fixed)	Height of worktable from the ground	900mm
	Width of T-slot on worktable	28mm
Gantry longitudinal movement (X-axis)	X-axis stroke	21m		16m
	X-axis servo motor power	2×3.0kW
Lateral movement of power head on gantry beam (V-axis)	V-axis stroke	1500mm	1980mm
	V-axis servo motor power	1.5KW
Vertical movement of power head on double column of gantry (U-axis, W-axis)	U-axis, W-axis stroke	1500mm	980mm
	U-axis, W-axis servo motor power	2×1.5kW
Table type drilling (sliding head)	Quantity	3
	Maximum hole drilling diameter	12～50
	Spindle RPM (frequency conversion 30-100Hz)	120－400r/min	120-560r/min
	Morse taper of spindle	4	8
	Spindle motor power	3×7.5kW
	Axial stroke (1 axis, 3 axis)	600mm	780mm
	Axial stroke (2-axis)	700mm	580mm
	1-axis, 2-axis, 3-axis drive mode	AC servo motor, ball screw drive
	1-axis, 2-axis, 3-axis feed rate	0－4000mm/min
	1-axis, 2-axis, 3-axis servo motor power	3×1.5kW
	Motor power of hydraulic pump	3＋4kW
Chip removal and cooling	Chip conveyor type	Flat chain
	Chip removal speed	1m/min
	Chip conveyor motor power	2×0.75KW
	Cooling pump motor power	0.45KW
Electrical system	Numerical control system	PLC
	Number	8
	Total power of machine tool	About 47kw
Overall dimension (L × W × H)		About 26m × 4.5 m× 4.2m
Weight		About 60tons

Details and advantages

1. The machine is mainly composed of bed, gantry, headstock, electrical system, hydraulic system, cooling chip removal system, detection system, etc.
2. The machine adopts the structure of gantry moving and fixed worktable, which can reduce the bed length and save the floor area.

CNC Drilling Machine for Beams4

3. The gantry motion (x-axis) is driven by linear ball guide, AC servo motor and low backlash rack and pinion. Linear ball guide, AC servo motor and ball screw drive are used to guide the movement of gantry crossbeam and sliding plate on two vertical columns (U, V, W). The feed motion of each drilling head (Axis 1, 2 and 3) is guided by linear roller guide, driven by servo motor and ball screw.
4. The spindle adopts the CNC feed drilling power head produced by our company.

CNC Drilling Machine for Beams5

5. The bottom of the machine is equipped with a flat chain type chip remover, and the chip conveyor is equipped with a water pump and a cooling liquid filtration circulating device.

CNC Drilling Machine for Beams6

6. The hydraulic system is mainly used for X-axis positioning and locking and balancing of power heads on both sides.
7. The electrical system is controlled by PLC and equipped with upper computer. The material is input and stored by computer, so it is easy to operate.

Key outsourced components list

NO.	Name	Brand	Country
1	Linear ball guide pair	HIWIN/PMI	Taiwan, China
2	PLC	Mitsubishi	Japan
3	Servo motor and driver	Mitsubishi / Panasonic	Japan
4	Hydraulic valve	ATOS	Italy
5	Oil pump	Justmark	Taiwan, China
6	Button, indicator light	Schneide	France
7	Drag chain	JFLP	China

Note: The above is our standard supplier. It’s subject to be replaced by same quality components of other brand if the above supplier can’t supply the components in case of any special matter.

Product detail pictures:

Related Product Guide:

We constantly believe that one's character decides products' high quality, the details decides products' high-quality ,together with the REALISTIC,EFFICIENT AND INNOVATIVE crew spirit for Chinese wholesale Steel Tower - CNC Drilling Machine for Beams – FIN CNC , The product will supply to all over the world, such as: Turkey, Hungary, Tanzania, All the imported machines effectively control and guarantee the machining precision for the products. Besides, we have a group of high-quality management personnels and professionals, who make the high-quality products and have the ability to develop new products to expand our market home and abroad. We sincerely expect customers come for a blooming business for both of us.

Angle CNC Machine